Buyers often treat a minimum order quantity as a negotiation position. Most of the time it is arithmetic.
Where the number comes from
Material minimums
Webbing, leather and fabric are bought by the roll or the hide. A roll of a specific width and colour is a fixed length. If your order needs 40 metres of a colour and the roll is 200 metres, someone is holding 160 metres of stock.
Dye lots
Colour is dyed in batches. A small run in a custom Pantone means either a dedicated dye lot, which has its own minimum, or waiting to be combined with another order.
Setup time
Cutting, stitching and hardware setting all require the line to be set up for that specification. The setup cost is the same whether you run 200 pieces or 2,000, so it dominates the unit price at low volume.
Quality control
Inspection is sampling-based. Below a certain batch size there is not enough to sample meaningfully.
What a minimum is not
It is not usually a hard limit set to keep small buyers out. It is the point below which the unit price stops making sense for either side. Ask what the minimum is per colour and per size — it is often lower than the headline number suggests, because the headline usually assumes one colourway.
Ways to work within it
- Consolidate colours. Three colours at 200 each may be cheaper than one colour at 600, or the reverse — ask which
- Start with a construction the factory already runs. Existing tooling and existing material mean a lower minimum
- Combine styles. Different products in the same material and colour can share a material buy
- Accept a stock colour for the trial, and customise on the second order
What a trial order is really for
Not to prove the product — a sample does that. A trial proves the supplier: whether the specification survives production, whether the packing matches what was agreed, and whether the ship date holds.
That is worth paying a higher unit price for, once.
